JASCO France : Leader en Spectroscopie et Chromatographie

Filtres seringues ClarinertTM

High Quality – Agela is an ISO 9001 certified manufacturer; all of our products are guaranteed to meet our published specifications.
Best Value – Our list prices are significantly lower than most other brands on the market.

Important Features:

All filters’s housing is made of high purity polypropylene
Female luer-lock inlets on all filters secure the fit to syringes
All filters are designed for use in both direction
All filters are autoclavable

Type of Filters

Single Layer Membrane: Single membrane, commonly used, highly cost-effective; newly developed ?33 mm Syringe Filters, with pore sizes of 0.22 µm and 0.45 µm are in stock.
Advanced Prefilter: A prefilter before the main membrane, which would avoid the damage to the soft main membrane from larger particles and clogging of the main membrane by colloidal particles, is good for the overall lifetime, process volume, and efficiency.
New! Sterilized Filters: Filter the sample with biological activity or aseptic requirements; generally used as a fast, convenient, reliable sterilization and filtration tool in the lab. We supply many kinds of syringe filters, which can be used for filtration of 1mL to 300 mL sample solutions.
New! IC Syringe Filters: The Nylon filter membrane is specially developed for IC filtration and is manufactured with advanced technology, with micro-pores evenly distributed with extremely low ion residual, which can effectively filter the particulate impurities.

Specifications

Type	Diameter (mm)	Pore size(µm)	Pressure rating (bar)	Bubble Point rating(bar)	Water speed (ml/min/cm2)	Air speed (L/min/cm2)	Filtration/Hold-up Volume	Effective filter area(cm2)
MCM	13	0.22	7	3.52	18	-	10 mL / < 25 µL	0.65
	13	0.45	7	2.20	60	-	10 mL / < 25 µL	0.65
	25	0.22	5	3.52	18	-	100 mL / < 100 µL	3.90
	25	0.45	5	2.20	60	-	100 mL / < 100 µL	3.90
Nylon	13	0.22	7	2.80	25	-	10 mL / < 25 µL	0.65
	13	0.45	7	2.50	75	-	10 mL / < 25 µL	0.65
	25	0.22	5	2.80	25	-	100 mL / < 100 µL	3.90
	25	0.45	5	2.50	75	-	100 mL / < 100 µL	3.90
PVDF	13	0.22	7	1.20	15	16	10 mL / < 25 µL	0.65
	13	0.45	7	0.56	35	20	10 mL / < 25 µL	0.65
	25	0.22	5	1.20	15	16	100 mL / < 100 µL	3.90
	25	0.45	5	0.56	35	20	100 mL / < 100 µL	3.90
PTFE	13	0.22	7	1.00	25	4	10 mL / < 25 µL	0.65
	13	0.45	7	0.63	60	8	10 mL / < 25 µL	0.65
	25	0.22	5	1.00	25	4	100 mL / < 100 µL	3.90
	25	0.45	5	0.63	60	8	100 mL / < 100 µL	3.90
PES	13	0.22	7	-	-	-	10 mL / < 25 µL	0.65
	13	0.45	7	-	-	-	10 mL / < 25 µL	0.65
	25	0.22	5	-	-	-	100 mL / < 100 µL	3.90
	25	0.45	5	-	-	-	100 mL / < 100 µL	3.90
Reg. Cellulose	13	0.22	7	-	-	-	10 mL / < 25 µL	0.65
	13	0.45	7	-	-	-	10 mL / < 25 µL	0.65
	25	0.22	5	-	-	-	100 mL / < 100 µL	3.90
	25	0.45	5	-	-	-	100 mL / < 100 µL	3.90

Selection Guide

Material, pore size, and diameter are important elements when choosing proper syringe filters; protein-binding should also be considered when filtering the protein-containing solutions. Generally, there is no one type of membrane that can be used for all purposes. To get the ideal result, the proper membrane must be chosen.

Material Type	Characteristics
MCM (Hydrophilic)	Remove the particle from aqueous; Can be high temperature sterilized. Low protein-binding
Nylon (Hydrophilic)	Good flexibility and chemical compatibility (avoid strong acid and strong organic solution)
PTFE (Hydrophobic)	Broad chemical compatibility (compatible to any common solvents) Low protein-binding; Can be high temp. sterilized repeatedly; Low extractable; For use with high aqueous solution, pre-wet the filter membrane with MeOH, then rinse with DI water before fitering samples.
PVDF (Hydrophilic, Hydrophobic)	Low extractable; Low protein-binding; Broad chemical compatibility (avoid strong basic solution); Hydrophobic : for use with oranic solution Hydrophilic: can be used with high aqueous solution without pre-wet steps
PES (Hydrophilic)	Broad chemical compatibility Apply to high-throughput, high efficiency filtration Low protein-binding
Reg. Cellulose (Hydrophilic)	Low protein-binding Better strength than MCM

Chemical Compatibility

The introduction of extra impurities (extractables) is undesired; we should minimize the extractables during sample preparation. Extractables are often the result of inappropriate choice of materials, improper operation of the device during the manufacturing process, or downstream particle shedding. Particular attention should be paid to potential impurities from the membrane and housing material. The membranes used in Agela’s Clarinert Filters are extensively tested to determine their compatibility with various HPLC solvents.

Material	MCM	R.C	Nylon	PTEE	Material	MCM	R.C	Nylon	PTEE
1-hexanol	R	R	R	R	glycol	R	R	R	R
CH3COOH,10%	LR	R	-	R	formic acid, 25%	LR	R	-	R
acetone	NR	R	R	R	n-hexane	R	R	R	R
acetonitrile	NR	R	R	NR	HCl,25%	NR	R	NR	R
fatty hydrocarbon	R	R	R	R	isopropanol	R	R	R	R
ammonia,1M	R	R	R	R	methanol	R	R	LR	R
aromatic hydrocarbons	R	R	N/A	R	nitrous acid,25%	LR	R	NR	R
benzene	R	R	R	R	pentane	R	R	R	R
boric acid	R	R	LR	R	phosphoric acid,25%	R	R	LR	R
tetrachloromethane	LR	LR	NR	R	phosphoric acid,45%	LR	LR	LR	R
carboxylic acid	R	R	NR	R	KOH,1M	NR	LR	NR	R
chloroacetic acid	NR	NR	NR	R	mineral salt in water	R	R	R	R
chloroform	NR	NR	R	LR	NaOH,1M	LR	NR	NR	R
cyclohexane	LR	LR	R	R	cellon	LR	R	LR	R
cyclohexanol	R	R	R	R	tetrahydrofuran	NR	R	R	LR
aether	LR	LR	R	LR	toluene	R	R	R	R
DMF	NR	NR	R	R	acetocaustin,10%	NR	NR	LR	R
DMSO	NR	NR	N/A	R	methyl chloroform	LR	R	LR	R
alcohol=<98%	R	R	R	R	chlorylene	LR	R	LR	R
ethyl acetate	NR	NR	R	R	xylene	R	R	R	R
chloroethylene	LR	LR	R	R

Références des filtres seringues

Chaque référence repérente une quantité de 100 filtres seringues

Single Layer Membrane & Advanced Prefilter
Taille de filtre	Taille des pores	Hydrophobe	Hydrophile	Nylon	MCM	PES	RC	PTFE	IC-Nylon
13mm	0.2µm	AS031320	AS071320	AS021320	AS011320	AS051320	AS061320	AS041320	IC021320
13mm	0.45µm	AS031345	AS071345	AS021345	AS011345	AS051345	AS061345	AS041345	IC021345
25mm	0.2µm	AS032520	AS072520	AS022520	AS012520	AS052520	AS062520	AS042520	IC022520
	0.45µm	AS032545	AS072545	AS022545	AS012545	AS052545	AS062545	AS042545	IC022545
	1 µm							AS042501
	5 µm							AS042505
	20 µm	AS032502		AS022502
33mm	0.2µm	AS033320	AS073320	AS023320	AS013320	AS053320	AS063320	AS043320
	0.45µm	AS033345	AS073345	AS023345	AS013345	AS053345	AS063345	AS043345
	20 µm	AS033300		AS023300
13mm (avec préfiltre)	0.2µm	AS031320-P	AS071320-P	AS021320-P	AS011320-G	AS051320-G	AS061320-G	AS041320-P
13mm (avec préfiltre)	0.45µm	AS031345-P	AS071345-P	AS021345-P	AS011345-G	AS051345-G	AS061345-G	AS041345-P
25mm (avec préfiltre)	0.2µm	AS032520-P	AS072520-P	AS022520-P	AS012520-G	AS052520-G	AS062520-G	AS042520-P
	0.45µm	AS032545-P	AS072545-P	AS022545-P	AS012545-G	AS052545-G	AS062545-G	AS042545-P
	1 µm							AS042501-P
	5 µm							AS042505-P
33mm (avec préfiltre)	0.2µm	AS033320-P	AS073320-P	AS023320-P	AS013320-G	AS053320-G	AS063320-G	AS043320-P
33mm (avec préfiltre)	0.45µm	AS033345-P	AS073345-P	AS023345-P	AS013345-G	AS053345-G	AS063345-G	AS043345-P
13mm (stérilisé)	0.2µm	AS931320		AS921320	AS911320	AS951320	AS961320	AS941320
13mm (stérilisé)	0.45µm	AS931345		AS921345	AS911345	AS951345	AS961345	AS941345
25mm (stérilisé)	0.2µm	AS932520		AS922520	AS912520	AS952520	AS962520	AS942520
25mm (stérilisé)	0.45µm	AS932545		AS922545	AS912545	AS952545	AS962545	AS942545

Système de filtration par filtre membrane

Système de filtration

The system includes a borosilicate glass funnel, a sintered borosilicate glass membrane core on the neck, aluminum clamp, and borosilicate glass filter flask. It can be used with or without a membrane filter depending on the application requirement to filtrate organic or naqueous solution. It is also used for liquid degassing.

Références
Funnel Volume (mL)	Flask Volume(mL)	Quantité	Cat. No.
300	1000	ea	AM3100
500	2000	ea	AM5200

Filtres membrane

Materials: Cellulose Acetate, Nylon, PVDF, PTFE;
Pore sizes: 0.22µm, 0.45µm;
Diameters: 13mm, 25mm, 50mm;
Custom sizes available upon request.>

Material	Diameter(mm)	Pore Size	Qty	Cat. No.
Cellulose Acetate	13	0.45µm	100/pk	AM011345
	25	0.45µm	100/pk	AM012545
	50	0.45µm	100/pk	AM015045
Nylon	13	0.45µm	100/pk	AM021345
	25	0.45µm	100/pk	AM022545
	50	0.45µm	100/pk	AM025045
PVDF	13	0.45µm	100/pk	AM031345
	25	0.45µm	100/pk	AM032545
	50	0.45µm	100/pk	AM0315045
PTFE	13	0.45µm	100/pk	AM041345
	25	0.45µm	100/pk	AM042545
	50	0.45µm	100/pk	AM045045

96-Well Filtration Plates and Collection Plates

96-well Protein Precipitation Plates

The wide selectivity range of protein precipitation plates makes it possible to supply preparation methods for samples with complex matrices.

Features and Applications

Use chemical inert material, pH tolerance range: 1-13;
Compatible with automatic SPE or manual handling;
High throughput, superior to the traditional liquid-liquid extraction technique;
Dispense with stirring and centrifugal separation;
Larger specific surface area speeds up the extraction procedure;
Dispense with activating treatment.

96-well Filtration plate and collection plate parts number
Type	Volume	Quantité	Cat No.
Filtration plate PP frits 20µm	2mL	10	FTPP2002-01
Filtration plate PP frits 20µm	1mL	10	FTPP2001-01
Filtration plate PTFE membrane 0.45μm	2mL	10	FTPF4502-01
Filtration plate PTFE membrane 0.45μm	1mL	10	FTPF4501-01
Filtration plate packed with earth diatomaceous 100mg	2mL	10	FTFT1002-01
Filtration plate packed with earth diatomaceous 100mg	1mL	10	FTFT1001-01
Protein precipitation plates and collection	2mL	10	PPPC1002-01
Protein precipitation plates and collection	1mL	10	PPPC1001-01
Collection plate, round bottom	2mL	50	CLCM0002-01
Collection plate, round bottom	1mL	50	CLCM0001-01
96 well cap mats		50	CLCM9600-0