Hardened aerospace grade stainless steel is used to produce all of ICL’s die sets. The 3mm to 16mm dies are used primarily for KBr pellets for transmission analysis by IR spectroscopy, while the larger dies are most commonly used for producing briquettes for XRF spectroscopy. The 13mm Macro-Micro die is chosen by most spectroscopists for KBr pellets, and it is available with paper inserts with a variety of small apertures (1.5, 3, 5, & 11mm) that enable the user to make micro-pellets with a 13mm die set and also provide a useful frame for mounting and storing the pellets.
All ICL dies have an upper and lower stainless steel section for ease of disassembly and they are sealed with viton seals. For ease of use, the weight was reduced in all die sets in the 13mm to 40mm range by adding an outer shield of aluminum. This feature makes them much easier to handle than 2 piece dies made completely from stainless steel due to their lighter weight, but without sacrificing strength or durability. The dies can be evacuated with a vacuum pump to reduce the moisture in the sample. 13mm and 20mm dies are typically used with 12 to 20 ton presses, while the larger size dies are used with 20 to 40 ton presses and are most commonly used for briquetting samples for XRF analysis.
To enable preparation of the finest quality pellets and briquettes, anvils are optically polished to a mirror finish and are free from scratches or digs. All die sets in the 13mm to 40mm size range are available with optional extremely hard tungsten carbide polished anvils for use with abrasive samples.
Features:
| Die Size | 3mm | 5mm | 10mm | 13mm | 16mm | 20mm | 25mm | 32mm | 35mm | 40mm |
|---|---|---|---|---|---|---|---|---|---|---|
| Part No. | 0012-6646 | 0012-6647 | 0012-6648 | 0012-2477 | 0012-6649 | 0012-5223 | 0012-6653 | 0012-6633 | 0012-6634 | 0012-6635 |
| Total height | 2.6", 66mm |
3.5", 89mm |
2.75", 70mm |
2.83", 72mm |
2.75", 70mm |
4.265", 108.3mm |
4.75", 120.7mm |
4.75", 120.7mm |
4.75", 120.7mm |
4.75", 120.7mm |
| Plunger height | 1.30", 33mm |
2.12", 54mm |
1.30", 33mm |
1.36", 34.6mm |
1.30", 33mm |
2.24", 57mm |
2.24", 57mm |
2.24", 57mm |
2.24", 57mm |
2.24", 57mm |
| Base diameter | 1.97", 50 mm |
1.97", 50mm |
1.97", 50mm |
2.0", 50.8mm |
1.97", 50mm |
3.54", 90mm |
3.54", 90mm |
3.54", 90mm |
3.54", 90mm |
3.54", 90mm |
| Single anvil height | 0.177", 4.5mm |
0.217", 5.5mm |
0.217", 5.5mm |
2.5", 6.35mm |
0.217", 5.5mm |
0.375", 9.5mm |
0.375", 9.5mm |
0.375", 9.5mm |
0.375", 9.5mm |
0.375", 9.5mm |
| Vacuum tube diameter | 0.25", 6.35mm |
0.25", 6.35mm |
0.25", 6.35mm |
0.25", 6.35mm |
0.25", 6.35mm |
0.25", 6.35mm |
0.25", 6.35mm |
0.25", 6.35mm |
0.25", 6.35mm |
0.25", 6.35mm |
| Load limits | 1/2 ton | 2 ton | 7 ton | 10 ton | 15 ton | 30 ton | 30 ton | 30 ton | 30 ton | 30 ton |
| Part No. | Description |
|---|---|
| 0012-6646 | 3mm KBr die set |
| 0012-6647 | 5mm KBr die set |
| 0012-6648 | 10mm KBr die set |
| 0012-2477 | 13mm KBr die set with 2 SS anvils & assorted paper inserts for micro sample |
| 0012-4509 | Set 2 replacement SS anvils, 13mm |
| 0012-5113 | Set 2 tungsten carbide anvils, 13mm |
| 0012-6649 | 16mm KBr die Set with 2 SS anvils, 16mm |
| 0012-6650 | Set 2 replacement SS anvils,16mm |
| 0012-6651 | Set 2 tungsten carbide anvils, 16mm |
| 0012-5223 | 20mm die set with 2 SS anvils |
| 0012-6652 | Set 2 replacement SS anvils, 20mm |
| 0012-6907 | Set 2 tungsten carbide anvils, 20mm |
| 0012-6653 | 25mm die set with 2 SS anvils |
| 0012-6654 | Set 2 replacement SS anvils, 25mm |
| 0012-6655 | Set 2 tungsten carbide anvils, 25mm |
| 0012-6633 | 32mm die set with 2 SS anvils |
| 0012-6656 | Set 2 replacement SS anvils, 32mm |
| 0012-6657 | Set 2 tungsten carbide anvils, 32mm |
| 0012-6634 | 35mm die set with 2 SS anvils |
| 0012-6658 | Set 2 replacement SS anvils, 35mm |
| 0012-6659 | Set 2 tungsten carbide anvils, 35mmv |
| 0012-6635 | 40mm die set with 2 SS anvils |
| 0012-6660 | Set 2 replacement SS anvils, 40mm |
| 0012-6661 | Set 2 tungsten carbide anvils, 40mm |
