ACCESSOIRES DE FLUORESCENCE




FDA-430

This accessory consists of a sample holder and a powder sample cell. This accessory is used for front surface viewing of powders, films or other solid samples. The excitation beam irradiates the front surface of the sample with an incident angle of 30 degree. For powder samples, the special cell is used. The cell has an 18 mm dia. quartz window and 3 mm thickness. The cell is held in the holder by means of a spring activated mechanism. A film or other larger solid sample is held in place directly by the spring mechanism instead of using the special cell. The minimum sample size is 5 x 5 mm and the thickness of the sample should be less than 10 mm. Optional cut filter for removing the scattering light should be set on the window of Ex side. And filter holder is available on the solid sample holder.


<Specificaitons>
Window material: Fused slica
Powder cell size: 18 mm dia. x 3 mm thickness
Shape of film and solid: 5 x 5 mm, 10 mm thickness or less


FP-1061


Ordering Information
6808-J023A FDA-430 Solid sample holder
6105-J129A FP-1061 Powder cell

 


     Zone de la Bouvre, 17 rue Gutenberg 44340 BOUGUENAIS      Tel: +33(0)2.40.43.00.43    Fax: +33(0)2.40.43.24.37