micro21 AS-01 Autosampler for Capillary LC

Low-dispersion injection valve for high separation efficiency

The micro21AS-01 employs an injection valve optimized for micro HPLC to reduce the dispersion of sample components during injection which causes peak broadening.

Minimized gradient delay at the time injection mode

At the time injection mode, after a sample is injected to a column, the injection valve can be switched to the Load position to isolate the sample loop from the flow line and eluent flows without passing through the loop. This minimizes the internal volume of the autosampler resulting in shortening the gradient delay.

Wide variety of sample vials
The micro21AS-01 accepts a variety of different vials including standard 2.0mL, micro volume 300 or 200μL, and large volume 4mL vials. Two 96 or 384-well microplates for continuous measurement of 192 or 768 specimens are also available.


Specifications

6855-J032A micro21AS-01 Autosampler

Sample injection method : Variable sample volume injection method Time injection, Loop injection (Flow line changing is required.)
Metering method : By metering pump
Metering pump speed : 0.1 ~ 25.0 μL/sec
(standard metering pump) variable setting
Injection volume: 0.1 ~ 100 μL (0.1 μL increments)
Number of samples : 120 (2.0 mL vials, standard rack)
224 (300 μL or 200 μL vials, micro-volume rack)
96 x 2 (96-well microplate X 2, microplate rack)
384 x 2 (384-well microplate X 2, microplate rack)
Reproducibility: RSD 0.3 % or less (10 ~ 100 μL),
RSD 1.0 % or less (1.1 ~ 9.9 μL),
RSD 5.0 % or less (1.0 μL or less)
(Using designated parameters under specified conditions)
(When Loop injection method is selected, less than 1.0 % RSD at 1.0 μL injection using designated parameters under specified conditions.)
Contamination : 0.01 % or less for 10 μL injection using designated parameters under specified conditions
Dimension: 300 (W) x 386 (H) x 500 (D) mm
Weight: Approx. 25 kg
Power Input voltage: AC100 ~ 240 V ±10% 50/60 Hz
Power consumption: 230 VA




     Zone de la Bouvre, 17 rue Gutenberg 44340 BOUGUENAIS      Tel: +33(0)2.40.43.00.43    Fax: +33(0)2.40.43.24.37